How to Replace a Saab 9-3 Key
The Saab 9-3 has a great deal of appeal for drivers. It has excellent visibility and a powerful performance engine. It has a very high safety rating.
However, it is crucial to make sure that you have two keys that are working for your vehicle. If you lose only one key, it can be very expensive to add a new one.
How to Replace the Ignition Key on the Saab 9-3
If your car key won't engage in the ignition and you want to replace it, you'll need to replace it. This guide will guide you through how to do it on a Saab 9-3. You will need a replacement key with a reprogrammable battery and a brand new key-fob cover.
Contrary to earlier models, modern Saab vehicles use a transponder in the key-fob instead physical key that can be used to unlock and start the car. The problem with this is that the reprogrammable battery in the key-fob can wear out and won't hold a charge any longer. This is especially relevant if you use the same key for the same lock.
The good news is that it can be replaced easily by an experienced locksmith. If you have the right tools, and a little patience, you can do it yourself. The first step is to remove the key-fob. This is accomplished by inserting a flathead screwdriver in the slot in the middle of the case. You will need to work slowly, as the plastic is very thin and can be damaged easily.
After the case has been opened then you can prepare the new key by combining the lower section of the old key with the transponder and banana on the new key. This will ensure the new key is properly connected to your CIM that can make a big difference when replacing the sole key for your Saab 9-3.
How to replace the ignition Key on the Saab 900
If you don't have two keys, you'll need to take off the steering wheel and dashboard for access to the ignition. Begin by disconnecting saab replacement keys g28carkeys.co.uk . Once the battery is disconnected, you can remove the dashboard and trim pieces that surround the steering wheel. Once the dash has been removed, you can put screws into the hole behind the ignition switch.
The ignition cylinder is equipped with a lock for keys that could prevent the vehicle from starting if it does not have the key inside it. If the ignition switch on your 900 doesn't work properly, check if the key is in the lock or is stuck in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to prevent bent.
Saab cars are different from other cars in that they don't use traditional keys made of metal. Instead, the car is able to recognize the electronic signals generated by the key fob through a special chip in it.
If you lose your only working key fob the dealer will charge you the most expensive dollar for replacing your computer module (known as the CIM). However, we can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. This will save you over 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Learn more about it here!
How to Replace the Ignition Key in a Saab9-5
The metal component of a classic Saab key is simple to copy, and it's not a major obstacle against theft of a vehicle. The real protection comes from the electronic part inside the key-fob. It contains a chip that detects the car when it is inserted into the ignition switch.
Saab's anti-theft system has relied upon this technology for over 10 years. It's not as effective as a physical door lock however, it makes the theft of your car much more difficult. That's why every Saab owner should keep a spare key on hand.
The majority of new Saabs come with two keys in the factory. However, you can purchase additional keys at a dealer through a special handheld computer referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, which have modernized, more modern features that require a separate key-fob to operate using a different procedure.
The dealer will replace the CIM or TWICE module on those vehicles if all keys are lost, and charge you top dollar to do it. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How to Replace the Ignition Key in an XC90 Saab
If your SAAB 9-3 key fob begins having problems turning the lock barrel It could be the time to replace it. The process is simple and you don't have to go to a dealership. Instead you can complete the process yourself at home with a few simple tools.
First, you'll need to make the keys for your new car. Before you start, ensure that the anti-theft feature is disabled by placing blocks on your rear wheels, and then adjusting the handbrake. Next, put the key in the ignition and turn it to the ON position that activates the accessories but does not start the engine. Repeat this five times, then keep the key in the on position.
You'll then need to purchase an additional case for your key fob. They are readily available at many auto parts stores and are usually extremely affordable. They can be purchased without electronics depending on the model.
To open the case simply push the flathead screwdriver into the slot in the middle. The case should break easily, and once you've got it open, you'll get access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.